Category Archives: Vivid

Million shades of white LED

Nowadays LEDs have great efficacy and lifetime. They produce more and more light with less power. I think that it’s less important to increase efficacy because we have already reached what the market demands. What else we need from the light than a lot of lumens? In this blog post, I’ll compare the differences between white LEDs.

We all know that LEDs are available in different color temperatures. For example, Citizen 6 generation’s LEDs are available from 2700K to 6500K. They are also available in different color rendering indexes. Color rendering index simply means how well a white light source can show, or render, colors compared to sunlight. We know that the color rendering index does not always tell the whole truth (You can read more from this blog post).

Nowadays we need a light source that has good efficacy and color rendering, and it doesn’t hurt if the light source can be customized to use in many different luminaires. We want light source that brings colors vivid and alive. Also, design interiors with relaxing atmosphere.

Let’s look into what else affects the quality of light than the color rendering index and color temperature.

White without greenish tone

IMAGE: Black line in the picture is B.B.L. Red circles indicate below B.B.L. LEDs.

In some projects, we want a light source that makes white look whiter. Some LEDs may turn white into light green. Traditional white LEDs’ color temperature chromaticity is on or very near B.B.L. (Black Body Locus). Citizen also produces below B.B.L. LEDs. Their color temperature is below the B.B.L. line. As you can see in the picture, above the line is greenish colors and below the line is reddish colors. Below B.B.L. LEDs make white look pure white and it also renders red colors better. This way we can create light that doesn’t have a greenish tint.

Below B.B.L. LEDs are very popular in shop lighting and everywhere where brisk atmosphere is needed.

Read more about the color temperature from this blog post.

More attractive display with high color contrast

The general color rendering index (CRI) is defined as an average of the sum of first eight R-values. However, these first eight indexes are rather less saturated colors, while indexes R9-R12 represent highly saturated colors. This means that the same CRI doesn’t mean same color rendering.

The Citizen’s Vivid LEDs make colors seem brighter with better color contrast. The spectrum of light has been designed to have as good as possible saturation. This way Vivid LEDs can render bold colors vividly. With better saturation, you can read easier for example newspaper under the Vivid LEDs.

Below you can see a picture where Vivid LEDs are compared. The higher the bar is, the better the color renders. The comparison is done to halogen bulb (0= halogen bulb performance).

Great use for Vivid LEDs are places where good color rendering and concentration is needed, for example, clothing and cosmetic stores, art galleries, schools, hospitals, and offices.

There are two different Vivid LEDs:

  • Brilliant Vivid – Very high color contrast.
  • Natural Vivid – High color contrast.

Vivid LEDs are meant to be combined. Use Brilliant Vivid as spotlights to bring color and textures up, and Natural Vivid as base light because it has better efficacy but has still very good color rendering and contrast.

Change the color temperature of light

Everyone is now talking about “human-centric” -lighting in the lighting industry. It means that by changing the color temperature you can maximize productivity and improve concentration or create comfortable atmospheric feeling. Citizen’s Tunable White is a great solution for “human-centric” -lighting. Its color temperature can be changed freely from 2700K to 6500K. This means that you can achieve warm light like incandescent lamp and daylight with only one module. In addition to changing the color temperature, you can also dim the brightness.

Early Tunable White products have been big sized modules. Citizen’s Tunable white is as small as the COB. This means that you can make a lot of smaller Tunable White luminaires than before. The small size also gives more even light. The spots between cool and warm dies are practically invisible, which guarantee more smoothly light.

By connecting Tunable White into the right control unit, you can change the color temperature and brightness according to the time of day.

Light that gets warmer by dimming

One of the features of the halogen lamp is that when dimmed its color temperature changes warm-toned. Citizen’s Dim-to-Warm COB-LED does the same thing.

Dim-to-Warm is a COB-LED, so you don’t need any complicated special features from the driver, like two-channeling or programming features. Ordinary triac dimmable driver is enough. Dim-to-Warm COB has preset dimming curve, so when you dim it, its color temperature changes automatically just like halogen.

I hope that this blog post gives you some new thoughts for designing the luminaires. When you use any of the LEDs that I just presented to you above, you’ll get a luminaire that has more to provide than just ordinary light source. This way you can have competitive advantage.

You can download presentation about Citizen LEDs below. If you have anything to ask, please do not hesitate to contact me. My email address is taru.matikainen@light.fi and I’m always happy to help you.

Download Here

What We Are Presenting in Elfack?

Elfack exhibition will be held in Gothenburg, Sweden from 9th to 12th of May. As it has been with previous exhibitions, we will be releasing new products and presenting the latest technology at our stand.

This year we will introduce and present the following products at our stand F04:70.

aLED Engine

aLED Engine

aLED Light Engine

We designed aLED Engine for applications that require a lot of light. aLED Engine consists of Furukawa heat pipe and Citizen COB LED.

In addition you can also choose a suitable optics and LED driver for the light engine from our selection. Suitable drivers are available as on/off, 1-10V dimming and DALI dimming.

aLED Engine is also compatible with Merrytek sensors, which allow you to control the lighting as you wish.

The 300W engine produces 36.000 lm at 4.000K and weighs only 3,6 kg with a driver installed.

aLED Engine will be at our stand in Elfack. There you can see the engine in action and try it with a daylight sensor.

Download More Information

Furukawa HYC Series

Furukawa HYC Series uses heat pipe technology to transfer the heat and makes heat sinks more efficient in cooling the LED.

how heat pipe works

How Heat Pipe Works

Heat Pipe’s thermal conductivity is almost 200 times better compared to copper. This allows the heat sink to be a lot smaller than we are used to.

Smaller heat sink reduces the weight of the luminaire dramatically.

The heat pipes effectively transfer heat from the heat source throughout the whole heat sink cooling the heat source faster than ever.

Heat Pipe vs. No Heat Pipe

Heat Pipe vs. No Heat Pipe

Furukawa heat pipes are compatible with Citizen COBs.

Furukawa heat pipes will be at our stand so you can see and try how light they are.

Read more about Furukawa heatpipe from here.

aLED & Letaron Drivers

aLED Driver

aLED Driver

aLED and Letaron offer a versatile range of both constant current and constant voltage drivers from low to high power (from 1 W up to 600 W).

Ouw own aLED drivers are best suited for high power applications. They are all available in IP68 and can be ordered as on/off, 1-10V dimming or DALI dimming.

Letaron drivers are best suited for low power applications, although they are available up to 52W.

Letaron offers a variety of designs to suit your needs including round, rectangular and slim models.

The Letaron low power drivers are also compatible with OLED light sources.

aLED and Letaron drivers will be on at our stand so you can see and try them yourself.

Merrytek

Merrytek sensors

Merrytek offers a wide range of different sensors. Some sensors come with LED driver and some are independent and can be connected to LED driver.

Merreytek has products particularly designed for eg. homes, schools, stairways, warehouses, offices, parking garages and outdoor use.

Merrytek’s intelligent lighting control products include:

  • Microwave motion and daylight sensors
  • Dimmable LED drivers
  • LED drivers with intergrated sensors

There will be Merrytek products on display at our stand. We will have an aLED engine wiht Merrytek’s daylight sensor on our stand, so you can see how it functions.

Citizen Gen 6, AC COB &Vivid Series

Citizen released Gen 6 COB and AC COB earlier this year with improvements compared to the previous versions.

Thermal Resistance

Thanks to better heat resistance, you can use much smaller heat sink. Gen 4 on the left, Gen 5 on the middle and Gen 6 on the right.

For the new Vivid series we’ve prepared a demo wall at Elfack for you to examine the possibilities of color quality control in LED lighting.

Seminar about color quality

We will organize a seminar about color quality on the first day of the exhibition.

Color comparison Vivid COBColor Comparison Regular COB 3000K Ra80 vs. Vivid Brilliant

The seminar will take place on Tuesday 9th of May.
Time: 16:00-19:00
Place: Hotel Gothia Towers, Tower 1, meeting room R22-23

The program:

  • Doors open at 16:00
  • Coffee
  • Welcome / Arrant Light Oy by Janne Mäkinen, Managing Director / Arrant-Light Oy
  • Color Quality with CITIZEN by Kosuke Tsuchiya, Field Application Engineer / Citizen Electronics Co.
  • Demonstration and open discussion
  • Refreshments and snacks
  • Close at 19:00

Please sign up for the seminar as soon as possible or latest by April 30th. We have limited seats and there is room for the first 20 persons only.

Sign Up for Our Seminar

Welcome to visit our stand F04.70 at Elfack.

All datasheets and other material will be available from our website soon. If you wish to download material about these new products before the exhibition. You can do that here.

Vivid LEDs: Special Color Rendering With Spectrum Tuning

When we talk about color rendering, traditionally that conversation has been filled with CRIs and Ra-indexes. These traditional ways of telling how well certain light source represents sunlight have been criticised because they may not tell the whole truth.

In recent years, LED manufacturers have been trying to answer this criticism by creating different products. Terms like “premium white”, “crispy white”, “pearl white” and “vivid white” have come to LED markets.

Despite the different terms, they are all meant for the same purpose: To represent certain colors and make the lighting look better. I will be using term “Vivid” as it is the term Citizen Electronics uses. And to be honest, it describes the purpose of these LEDs quite well.

Color rendering

Color rendering means simply how well a white light source can show, or render, the true colors of different physical objects compared to sunlight. You know the effect when you buy a jacket in the clothes shop and it looks completely different in sunlight.

Colors are divided into 15 indexes (R1-R15). A general color rendering index (CRI or Ra-index) is defined as an average of the sum of first eight indexes (R1..R8). However, these first 8 indexes are rather less saturated colors, while indexes R9-R12 represent highly saturated colors (red, yellow, green, blue).

CRI 100 = Sunlight

For example, in grocery stores, a shopkeeper may want to highlight red color of meat or colors of vegetables. This means that the general color rendering index doesn’t really tell anything about the rendering capabilites of the light. In this case, high rendering index of some of R9-R12 indexes is necessary. It doesn’t matter how high the CRI is, R9-R12 can be anything.

CRI 83 (look at R9)

CRI 83 (look at R9)

The above image shows the index values of R1-R15. The CRI is 83, but look at the R9 value. Not very good.

So basically, the LED itself can have the CRI of 97 and you still have no idea how does it render red or green for example.

Vivid via Spectrum tuning

Vivid LEDs are made using spectrum tuning. In short, this means that the phosphorus of the LED has been modified. How it is modified, depends on the LED and the intended application. Note that spectrum tuning can be made also by using RGB-LEDs.

For example, Vivid White LED’s spectrum has been tuned so that it represents white and bright colors as well as possible. The colors are more saturated than under typical normal LED light.

Test report on Vivid White aLED Module

Test report on Vivid White aLED Module. Click the image to open it in new tab for better view.

These LEDs work very well for example, in clothing stores, where you have a lot of different colors that need to look good.

Here are two good principals when choosing LED:

  1. Think about your application, what colors do you want to highlight?
  2. Don’t stare at the CRI (unless you get a full report), it might not tell everything

Conclusion

Traditional way of thinking color rendering solely through the CRI should be updated. More importantly, you should know what you want to highlight and ask for a LED suited for your application.

Download More Information About Vivid