Category Archives: AC COB

Environmentally Friendly LED Lighting Components

Generally, we can say that LEDs are environmentally friendly and recyclable. They have a long lifetime and low power consumption. They don’t contain hazardous substances, for example, mercury as compact fluorescent lamps do. In this blog post, I will present to you four environmentally friendly luminaire component choices.

LED That Don’t Need a Driver

Have you ever looked inside the driver? In the picture above, you can see the inside of the small-sized one. Drivers are made of many different materials and components. That’s why they are hard to recycle. The fewer components product has, the easier it is to recycle. For example, an aluminium heatsink is easy to recycle, because it contains mainly aluminium.

Drivers are the most fragile parts of the luminaire. In general, they can be the first component that breaks from the luminaire.

All traditional LEDs needs a driver to work. Except for AC COB that can be connected straight to the mains power. Because AC COB doesn’t need a driver, luminaire can be a lot smaller than before. This gives more flexibility for the design. At the same time, you can save in logistics and packing. You can read more about AC COB from our blog post.

Same Lumen Output with a Smaller Luminaire

Size is an important feature when designing environmentally friendly luminaires. When you use less material the luminaire gets smaller. And by downsizing the luminaire you can save in logistics and packing.

One great way to make the luminaire smaller is Citizen’s HC COB. It has higher efficacy and lower terminal resistance. This means that you can use a smaller heatsink. Therefor luminaire gets smaller the and you can still get the same lumen output. As a result, it makes HC COB more environmental choice. Read more about HC COB from here.

The Right Amount of Light and Less Light Pollution with Right Optics

When we talk about LEDs, often we come up with light pollution. We can say that almost all outdoor light that doesn’t have a purpose is light pollution. This means that light always needs a target.

When you replace the old light sources (for example HPS-lamps) with same powered LED, you get a lot more light. This is not environmentally friendly. You get a lot of unnecessary light and same time create light pollution.

When we design luminaires with the same lumen output than before, LED saves energy. This is because LED has less than 10% of the incandescent lamp’s power consumption. That’s why it is important to think about lumens, not power when replacing lamps with LEDs.

LEDs light comes from a very small area and from a flat surface, so it is easier to control than a light bulb. In street lights, most of the light pollution comes from light that goes up and away from the road. It is important to choose optics for the luminaire which are designed to minimize the light pollution.

Control the Luminaires with Sensors

There’s a lot of different sensors for different applications. The most familiar ones are the on/off-sensors. They automatically switch the light >on and off  by movement. They save energy, as the light can never be accidentally left on. This type of sensors is already generally used in public spaces.

Another great way to save energy is to use daylight sensors. They react to the light that comes from the outside. This way you can maximize the benefits of the sunlight. For example, during the day, you don’t need as much artificial light as in the evening. Read more about sensors from this blog post.

We have already made big steps in ecology, but still, we have a lot to do. We need to think about the packing of the luminaire and logistics. It’s important to minimize the amount of plastic used in packing. Also, we need to think alternatives for air freight. Small choices really matter.

Below you can download a presentation about Citizen’s AC COB. If you have anything to ask, you can always email to me: taru.matikainen@light.fi

Download Here

Thank You for Everyone at Elfack 2017

I would like to thank everyone who we met at the Elfack Exhibition in Gothenburg, Sweden.

We had some good conversations with our existing customers as well as new people. This year we tested the color quality of Citizen’s LEDs at our stand. We got many answers through our questionnaire and found out that many visitors were excited about this new way of lighting.

If you took part in the test, you will receive the test results soon. We will also share these results with the public a little later.

We had a chance to show you our new products and the feedback we got from you was very encouraging.  I went through all the products in my last blog post, and if you wish to download more information about them, you are most welcome to do so here.

The products displayed at Elfack include:

  • aLED Engine
  • Citizen Gen 6
  • AC COB
  • Citizen Vivid Series
  • Furukawa Heatpipe
  • Merrytek sensors
  • Letaron & aLED Drivers

Our personnel will contact you as agreed, if they haven’t already. In case you have anything to ask, you can contact us directly.

 

AC COB – Easier way to make a luminaire

What is AC COB?

AC COB is brand new AC LED solution from Citizen Electronics. It is available with holder which contains necessary components to connect package directly to mains voltage. So basically it is designed to make life of luminaire manufacturer easier.

AC COB With Connector

AC COB With Connector

What advantages?

AC COB has integrated circuit which allows you to control luminous flux more accurately. For all CCT and CRI versions you are able to have exactly same luminous flux from the package e.g. 750, 1000, 1500 and 2000 lumens.

5 volt output enables you to use e.g. motion sensor, so you can easily adapt external sensors to easily add features to your luminaire.

There is no additional losses from driver and so there is no problem to have good efficacy even with low powers. AC COB with new integrated circuit has good compatibility with dimmers, you are able to dim this solution with Triac (leading-edge) and Transistor (trailing-edge) dimmers.

Small form factor and no need for external driver allow even more creativity to luminaire design. There is no need to worry where to place the driver.

What you need to take to consideration?

AC COB has of course similar characteristics than normal COB meaning warmer CCTs have lower efficacy than cooler CCTs. With fixed luminous flux, that means you have difference in power. So 2700K Ra90 AC COB consumes more power than 5000K Ra80.

And of course AC is still AC. If you don’t use more complex circuitry to modify AC to DC, you will still have AC characteristics affecting luminous flux. Mainly with AC LEDs this means that you have flicker present in light source. To reduce that effect, it is good to consider e.g. secondary optics which lower this phenomenon.

AC COB In Connector

AC COB In Connector

Conclusion

Even though AC LED might have it’s limitations it has certainly some advantages which make it viable solution as light source. It has ENEC certified components which are easy to use to design new luminaires and you can make testing with this solution in different luminaires. Now it is time to consider where you could use AC COB to realize its advantages.

You can download datasheets and brochure from the button below.

Download Here